NenaMark31.13 - App Store
You'll be able to see results in few seconds.
Publisher Description
Nenamark3 is a benchmark that measures the 3d performance of a system by gradually increasing the complexity of a scene until the frame rate drops below 60.
Purpose
Nenamark3 is run to compare different systems against each other from a 3d graphics perspective. A 3d graphics benchmark tries to show how well a system will perform in games or or apps that make use of 3d graphics.
3D Graphics Apps
A 3d app, such as a game, will typically have individual settings for different tiers of devices. A lo-end system will have less features and look less amazing than a hi-end system. If hi-end settings are used on a lo-end system it will not be able to maintain its frame rate of 60 fps, causing it to drop frames and “stutter”.
What a 3D benchmark should do
This means that a graphics benchmark should define a set of scenes of increasing complexity and find how far a system can go while maintaining 60 fps. The common way of running static scenes and measure the fps have several problems. First, it is not relevant to run at any other frame rate than 60. It is not certain that lower fps are comparable to each other. All we can say for certain is - did it make 60 or not? Second, once 60 is reached where do you go? While it is possible to do off screen render and let the fps go as high as it can this is also irrelevant. If you have more power you would probably want more advanced features rather than more of the lesser features (perhaps you’d want a more correct lighting model rather than say more geometry).
Go Slow
There is a point to scaling the complexity gradually over time. Especially embedded systems have quite sophisticated clock governors that speeds up the clocks when needed, even for the GPU. These sample the load at certain intervals and adapt so it makes sense to slowly build complexity. In a game there would be a few slow frames before the system could react which would be annoying but not critical.
Version History - Show average fps
- Revised shaders 1.13 11/21/2016 Dashboard Control Panel:
- Pause/Play Run
- Skip to next or previous level
- Fast Forward
- Go Invincible with the Star
- Return to main menu
Note that when tampering with a run, that is going invincible or skipping levels / fast forwarding, it is no longer possible to submit the result as it's no longer valid.
If you're interested in what fps your device scores on levels higher than the ones you reach then invincible mode is for you! 1.11 10/29/2016 Dashboard:
- Show level progress bar.
- Additional feature and scene stats information.
- Features are now displayed as "N/A", "Ready" or "Active".
- Tap the dashboard to enlarge it, useful on small screen devices.
Scene:
- When available the app makes use of dynamic tessellation for the terrain.
- Frustum culling is more effectively used to avoid sending out-of-frustum objects to the GPU.
Bugfixes. 1.1 10/12/2016 1.0 08/08/2016
About NenaMark3
The company that develops NenaMark3 is Nena Innovation AB. The latest version released by its developer is 1.13.
To install NenaMark3 on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the NenaMark3 as malware if the download link is broken.
How to install NenaMark3 on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the NenaMark3 is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After NenaMark3 is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.13
posted on 2026-10-15
Version History - Show average fps
- Revised shaders 1.13 11/21/2016 Dashboard Control Panel:
- Pause/Play Run
- Skip to next or previous level
- Fast Forward
- Go Invincible with the Star
- Return to main menu
Note that when tampering with a run, that is going invincible or skipping levels / fast forwarding, it is no longer possible to submit the result as it's no longer valid.
If you're interested in what fps your device scores on levels higher than the ones you reach then invincible mode is for you! 1.11 10/29/2016 Dashboard:
- Show level progress bar.
- Additional feature and scene stats information.
- Features are now displayed as "N/A", "Ready" or "Active".
- Tap the dashboard to enlarge it, useful on small screen devices.
Scene:
- When available the app makes use of dynamic tessellation for the terrain.
- Frustum culling is more effectively used to avoid sending out-of-frustum objects to the GPU.
Bugfixes. 1.1 10/12/2016 1.0 08/08/2016
version 1.13
posted on 2026-09-03
Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
- Show average fps
- Revised shaders 1.13 11/21/2016 Dashboard Control Panel:
- Pause/Play Run
- Skip to next or previous level
- Fast Forward
- Go Invincible with the Star
- Return to main menu
Note that when tampering with a run, that is going invincible or skipping levels / fast forwarding, it is no longer possible to submit the result as it's no longer valid.
If you're interested in what fps your device scores on levels higher than the ones you reach then invincible mode is for you! 1.11 10/29/2016 Dashboard:
- Show level progress bar.
- Additional feature and scene stats information.
- Features are now displayed as "N/A", "Ready" or "Active".
- Tap the dashboard to enlarge it, useful on small screen devices.
Scene:
- When available the app makes use of dynamic tessellation for the terrain.
- Frustum culling is more effectively used to avoid sending out-of-frustum objects to the GPU.
Bugfixes. 1.1 10/12/2016 1.0 08/08/2016
version 1.13
posted on 2026-08-21
Version History This update from Apple will improve the functionality of this app. No new features are included.
- Show average fps
- Revised shaders 1.13 11/21/2016 Dashboard Control Panel:
- Pause/Play Run
- Skip to next or previous level
- Fast Forward
- Go Invincible with the Star
- Return to main menu
Note that when tampering with a run, that is going invincible or skipping levels / fast forwarding, it is no longer possible to submit the result as it's no longer valid.
If you're interested in what fps your device scores on levels higher than the ones you reach then invincible mode is for you! 1.11 10/29/2016 Dashboard:
- Show level progress bar.
- Additional feature and scene stats information.
- Features are now displayed as "N/A", "Ready" or "Active".
- Tap the dashboard to enlarge it, useful on small screen devices.
Scene:
- When available the app makes use of dynamic tessellation for the terrain.
- Frustum culling is more effectively used to avoid sending out-of-frustum objects to the GPU.
Bugfixes. 1.1 10/12/2016 1.0 08/08/2016
version 1.13
posted on 2016-11-21
This app has been updated by Apple to display the Apple Watch app icon.
- Show average fps
- Revised shaders
version 1.13
posted on 2016-11-21
Nov 21, 2016 Version 1.13
This app has been updated by Apple to display the Apple Watch app icon.
- Show average fps
- Revised shaders
version 1.13
posted on 2016-11-21
Nov 21, 2016 Version 1.13
This app has been updated by Apple to use the latest Apple signing certificate.
- Show average fps
- Revised shaders
version 1.13
posted on 2016-11-21
21. Nov. 2016 Version 1.13
- Show average fps
- Revised shaders
version 1.13
posted on 2016-11-21
Nov 21, 2016 Version 1.13
- Show average fps
- Revised shaders
version 1.13
posted on 2016-09-06
version 1.13
posted on 1970-01-01
21 de nov de 2016 Version 1.13
- Show average fps
- Revised shaders
Disclaimer
Official App Store Link
We do not host NenaMark3 on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for NenaMark3 is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
